Overview:
The DuroBumps DBF17T Front Bump Stops for 2000–2006 Toyota Tundra replace the OEM rear-mounted front bump stops with a progressive, dual-durometer design for smoother suspension engagement and enhanced steering control.
– Designed for 0–3" lift, non-long travel setups
– Dual rubber densities reduce harsh bottom-outs
– Installs in OEM location with no loss of up-travel
– Minimizes bump steer and tie-rod wear under compression
– Solid 3/16" steel base plate ensures secure mounting
– Silent operation with no clunk or rebound noise
Specifications:
– Material: Dual durometer rubber
– Size: 2.5 in. diameter x 1.75 in. height (each)
– Compression: 0.3 in. at 1500 lbs.
– Weight: 17 oz. / 1.06 lbs. per set
– Base plate: 3/16 in. powder-coated steel
– Hardware: JIS 10.9 M10 x 1.25 x 35 mm flange bolts
– Thread locker: Medium (blue), single-use
– Part number: DBF2T / DBF17T
– Made in the USA
Fitment:
2000–2006 Toyota Tundra
Included:
– (2) Front DuroBumps bump stops
– (2) JIS 10.9 M10 x 1.25 x 35 mm flange bolts
– (1) Single-use medium thread locker
– (1) DuroBumps sticker
Notes:
For off-road use only. Not intended for towing applications. Installs at the rear OEM bump stop location on the front lower control arms only. Do not replace the front-mounted bump stops. Requires basic hand tools for installation.
