Overview:
The DuroBumps DBR425 Rear Bump Stops for the 2003–2024 Toyota 4Runner are designed for vehicles with 2 inches or more of rear lift. These 4.25-inch bump stops reduce up-travel to prevent shock over-compression while improving ride quality and suspension control.
– Adds 2 inches of bump stop height for lifted setups
– Corrects OEM bump stop-to-axle misalignment with integrated offset
– Dual durometer rubber for progressive, quiet dampening
– Helps reduce tire rub and driveshaft contact on skid plates
– Bolt-on installation to OEM frame mounts
Specifications:
– Height: 4.25 in.
– Up-travel reduction: 2 in. vs. OEM
– Material: Dual durometer rubber
– Dimensions: 5 x 3 x 4.25 in. each
– Weight: 38 oz. per set
– Hardware: JIS 10.9 M8-1.25 x 40 mm flange bolts with medium thread locker
– Recommended lift: 2 in. or more (non-long travel)
– Part number: DBR425
– Made in the USA
Fitment:
2003–2024 Toyota 4Runner
Downloads:
Installation instructions included with product.
Notes:
For off-road use only. Not intended for towing applications. Do not use spacers with this product. Side-specific installation; each bump stop is labeled for driver or passenger side. Requires minimum 2 inches of rear lift and is ideal for use with 10-inch rear shocks.
